FOAM PRODUCTS / MARINE DECKING

EVA Marine Mat

Textured foam decking for boat floors, cockpit areas and swim platforms.

AITO EVA Marine Mat provides a cushioned surface over rigid boat decking. Available as full sheets or shaped panels, it combines textured finishes, contrasting foam layers and adhesive backing options for new builds and refit projects.

Sheet size: 2400 × 900 mm
Standard thickness: 6 mm
Density: 160–180 kg/m³
MOQ: 10 sheets

EXPLORE TEXTURES View specifications →

Foam Boat Decking with a Finished Surface

The foam layer gives a softer contact surface than bare rigid decking. A brushed or patterned face provides texture underfoot, while grooves in a two-tone construction reveal the contrasting lower layer. Faux-teak lines create a plank-style appearance without timber strips.

Sheets suit workshops that measure and cut locally. Drawing-based panels suit projects with defined outlines, hatch divisions and fitting positions. The material can be supplied through the processing stages your workshop needs.

Texture Selection

T-1 — T-24

Compare the surface patterns and quote the T-number with your enquiry. Texture and colour are separate selections.

Select a marine mat surface texture

EVA marine mat texture T-1: textured chevron bands. — SELECTED TEXTURE **T-1** Textured chevron bands

EVA marine mat texture T-2: horizontal grooves. — SELECTED TEXTURE **T-2** Horizontal grooves

EVA marine mat texture T-3: fine brushed texture. — SELECTED TEXTURE **T-3** Fine brushed texture

EVA marine mat texture T-4: honeycomb pattern. — SELECTED TEXTURE **T-4** Honeycomb pattern

EVA marine mat texture T-5: straight longitudinal grooves. — SELECTED TEXTURE **T-5** Straight longitudinal grooves

EVA marine mat texture T-6: elongated diamond pattern. — SELECTED TEXTURE **T-6** Elongated diamond pattern

EVA marine mat texture T-7: textured horizontal bands. — SELECTED TEXTURE **T-7** Textured horizontal bands

EVA marine mat texture T-8: wave pattern. — SELECTED TEXTURE **T-8** Wave pattern

EVA marine mat texture T-9: square grid pattern. — SELECTED TEXTURE **T-9** Square grid pattern

EVA marine mat texture T-10: pebbled texture. — SELECTED TEXTURE **T-10** Pebbled texture

EVA marine mat texture T-11: wide longitudinal grooves. — SELECTED TEXTURE **T-11** Wide longitudinal grooves

EVA marine mat texture T-12: angled cross-grooves. — SELECTED TEXTURE **T-12** Angled cross-grooves

EVA marine mat texture T-13: raised checker pattern. — SELECTED TEXTURE **T-13** Raised checker pattern

EVA marine mat texture T-14: offset brick pattern. — SELECTED TEXTURE **T-14** Offset brick pattern

EVA marine mat texture T-15: textured diagonal bands. — SELECTED TEXTURE **T-15** Textured diagonal bands

EVA marine mat texture T-16: textured elongated diamonds. — SELECTED TEXTURE **T-16** Textured elongated diamonds

EVA marine mat texture T-17: diamond grooves. — SELECTED TEXTURE **T-17** Diamond grooves

EVA marine mat texture T-18: fine-grain texture. — SELECTED TEXTURE **T-18** Fine-grain texture

EVA marine mat texture T-19: broad angled bands. — SELECTED TEXTURE **T-19** Broad angled bands

EVA marine mat texture T-20: fine elongated diamond pattern. — SELECTED TEXTURE **T-20** Fine elongated diamond pattern

EVA marine mat texture T-21: textured wave pattern. — SELECTED TEXTURE **T-21** Textured wave pattern

EVA marine mat texture T-22: shallow angled bands. — SELECTED TEXTURE **T-22** Shallow angled bands

EVA marine mat texture T-23: wide chevron bands. — SELECTED TEXTURE **T-23** Wide chevron bands

EVA marine mat texture T-24: textured square grid. — SELECTED TEXTURE **T-24** Textured square grid

Select a sample to view it larger.
Use its T-number when specifying your mat.

T-1

T-2

T-3

T-4

T-5

T-6

T-7

T-8

T-9

T-10

T-11

T-12

T-13

T-14

T-15

T-16

T-17

T-18

T-19

T-20

T-21

T-22

T-23

T-24

Photographs show the sample textures. Match the final colour and surface to an approved physical sample.

Thickness & Layer Options

The standard sheet is 6 mm thick. The reference constructions below show single-layer and laminated options; availability is confirmed with the selected texture and construction.

Standard sheet thickness 6 mm

5 mm totalSingle layer
6 mm totalSingle layer
6 mm total3 + 3 mm
7 mm total3 + 4 mm
20 mm total3 + 17 mm

Layer dimensions add up to the stated total. Colours illustrate the layers.

Product Specifications

Standard sheet specification for material selection and ordering.

Confirm the selected texture, colour combination, backing and finished panel dimensions with the order.

Property	Specification
Product	EVA Marine Mat
Standard sheet size (L × W)	2400 × 900 mm
Standard thickness	6 mm
Density	160–180 kg/m³
Hardness	65 ±5 Shore C
MOQ	10 sheets
Surface	Texture selections T-1 to T-24
Supply form	Full sheets, individual pads or drawing-based panel sets
Backing	Adhesive-backed options
Processing	Grooving, lamination, CNC cutting and cutting to size

Processing & Supply

AITO supplies full sheets for your workshop or panels prepared to a deck layout. Specify only the processing stages you need.

Two-tone construction: Contrasting top and lower layers define the grooves and panel edges. Tan over black is shown alongside brown and grey examples in the product gallery.
Adhesive backing: A release liner protects the backing before fitting. Adhesive selection is matched to the deck substrate, surface finish and expected exposure.
Cut to the deck layout: Grooving, lamination and CNC cutting support panel sets with borders, hatch gaps and hardware cutouts. Full sheets are also available for further processing.

For a custom deck layout

Send a dimensioned drawing or measured template with panel outlines, borders, hatch divisions, groove direction and hardware cutouts. Identify each part and state the quantity. Photos help explain the installation area; dimensions define the cut.

Typical Applications

Cockpit floors & walkways: Panels arranged around seating bases, access hatches and deck fittings.
Helm & standing areas: Individual pads or integrated floor sections at the steering position and fishing areas.
Swim platforms & boarding steps: Shaped panels following platform outlines, step edges and drainage paths.
Hatch covers & smaller deck sections: Separate pieces that preserve hinge clearance, lifting points and access to fittings.

Fitting & Care

Dry-fit the cut panels before removing the release liner. Check hatch operation, seams, fittings and drainage. Prepare the deck and apply the mat according to the selected adhesive instructions. Textured or coated surfaces need an adhesion check before full installation.

For routine cleaning, use water and a soft brush, then rinse the surface. Check cleaner compatibility on a spare sample before using a cleaning product.

FAQ

Can I cut the sheets to fit my boat?

Yes. Sheets can be cut to a measured template. For AITO-cut panels, send a dimensioned drawing with hatch divisions, borders and hardware cutouts.

How do I specify a texture and colour?

Quote the T-number, top colour and lower-layer colour. Add the required thickness, sheet quantity or panel layout, and whether adhesive backing is needed.

Can the mat be fitted to fibreglass or aluminium?

These substrates can be reviewed for fitting. Surface coatings, existing deck texture and adhesive choice affect the bond, so check the actual surface before installation.

Are all thicknesses available with every texture?

The standard thickness is 6 mm. Other single-layer and laminated constructions are reviewed against the selected texture, colour and finished panel requirements.

Can you supply a sample before production?

Request a sample of the selected construction to check texture, colour, firmness and backing. Sample terms and production timing are confirmed for the order.